Power Bank Fast Charging Module PCB Circuit Board

Short Description:

Name	Power Bank PCB
Product Model	CW-Q15
Size	56.39*19MM
Charging parameters	Micro port, regular 5V2A, fast charge 9V2ATypec port, regular 5V2.5A, fast charge 9V2ASupport fast charging protocol, FCP, AFC, SFCP
Discharge parameters	USB1 port, regular 5V3.1A, fast charge 9V2A, 12V1.5AUSB2 port, regular 5V3.1A, fast charge 9V2A, 12V1.5ATYPEC port, regular 5V3.1A, fast charge 9V2A, 12V1.5A
PCB requirements	H=1.0mm ±0.1 mm FR4- 4-layer board, sprayed with lead-free tin, green oil, white printing

Send email to us

Product Detail

Product Tags

features

1.Output support protocol
USB port supports fast charging protocol, QC2.0/QC3.0/FCP, AFC, SFCP/ MTK PE
TYPEC port supports fast charging protocol, QC2.0/QC3.0/ FCP, AFC, SFCP/ MTK PE, PD2.0, PD3.0

2.Indicator light description
(1)A total of 5 indicator lights, 4 blue lights for battery indicator, 1 white light for fast
charge instruction
(2)When charging the mobile power supply, the indicator light that reaches the power level is always on, the indicator light of the highest power level is flashing, and the 4 blue lights are always on when the battery is fully charged.
(3)When the mobile power supply is discharged, it is not in the low-voltage state, the indicator light that reaches the battery level is always on, the indicator light that is lower than the battery level is off, and the lowest-level battery indicator light flashes when the power supply is low.
(4)In the fast charging state, whether it is charging fast or discharging fast, the fast charging indicator light is always on

3.other instructions
(1)After power on, if there is no discharge, the 32S will turn off the lights and enter standby
(2)The function of charging and discharging at the same time, and the function of charging and discharging at the same time
(3)Multi-port discharge, if more than 2 ports are discharging at the same time, fast charge cannot be recognized. The default is 5V. To fast charge, only single port discharge.
(4)Multi-port discharge, when it is reduced to only one port, all output ports will be closed after 16S, and then output again

Our Advantage

1.Support for customizing Power Bank PCB. We are a professional charger PCBA factory, with good engineer team. We can design the PCBA according to your requirements.
2.Support OEM&ODM, add your own brand and custom your own packaging. At present, we have OEM for many big brand consumer electronics customers.
3.Strict QC team control quality,All products are tested before leaving the factory to ensure that they are in good quality.

Previous: 18W Phone Power Supply Fast Mobile Charger PCB Circuit Board

Next: [Copy] Power Bank Fast Charging Module PCB Circuit Board

3 usb power bank pcb